Stafer 592TX500 Manual Del Usuario página 7

5. FUNCTIONS
592TX500 is designed for running up to 15 different channels more 1 sequencer
channel. Every single channel can be activated or deactivated (see point 5.1), so
that only the utilised channels can be accessible for the user. Besides, for every
channels can be activated or deactivated the additional command (see point 5.2),
variable according to the kind of device associated with the channel. The 15 chan-
nels are represented by the symbols 1,2,3,4,5,6,7,8,9,A,C,E,F,G,H. The sequencer
channel is represented by the "_" symbol.
To transmit a code of a channel:
- press and release the SELECT push-button until on the display appears the sym-
bol of the desired channel.
- press UP, STOP or DOWN depending on the command to impose.
5.1 Channels Activation/deactivation
- Hold the "SELECT" push-button until the symbol on the display begin to flash-
ing (approx. 4 sec.).
- Press and release the "SELECT" push-button until the symbol of the channel to
be activated/deactivated flashing on the display. If the
red point on the right of the symbol is switch on, it indicates that the channel is
activated, if the point is switch off, the channel is
deactivated.
- To modify the channel condition press "STOP".
- Repeat the lasts 2 steps for the channels you wish to change the programma-
tion.
- Waiting for 8 sec. without carry out any operation. The symbol on the display will
stop blinking and returns to its usual activity
maintaining only the desired channels.
5.2 Activation/deactivation of the first additional command:
The first additional command is variable according to the device associated with
the channel. For example, if the channel 2 is
associated with a wind-sun device compatible with the transmitter, the first addi-
tional command allows to activate/deactivate the sun
sensor; if instead the channel 2 is associated with a wind device compatible with
the transmitter, the first additional command allows to
activate/deactivate the automatic reopening. It is therefore necessary to follow the
associated device "instructions sheet", to identify
operation carried out by the first additional command.
To activate/deactivate the first additional command:
- Keep hold the "SELECT" push- button until the desired channel is selected.
- Holding "SELECT" press also "STOP" push-button. If the red point on the right
8 592TX500 rev00