Planar PR5030 Guia Del Usuario página 7

Label
Audio-out
10.
USB
11.
RS-232
12.
Power
13.
Security
14.
Lock
6
P /
OWER ON OFF AND
1.
Connect the power cord to the
projector [A] .Connect the other
end to a wall outlet. Switch [B]
from off (O) to on (
2.
The POWER and READY LEDs
on the projector turn on. Turn on
the connected devices.
3.
Ensure the Power LED is on (not
flashing) and then press the
Power button [C] to turn on the
projector.
(If any LEDs are flashing, do not
press the Power button. See
"LED Error Messages" in the
CD-ROM user manual.)
The projector splash screen
displays and connected devices
are detected.
Description
Audio loop-thru
Connect the USB
cable from a
computer
(supplied)
Installation control
Connect the
power cord
(supplied)
Secure to
permanent object
with a
Kensington® Lock
system
S L
ET ANGUAGE
—
)
— U s e r
— U s e r
4.
Press the Menu button and then
press the cursor
Installation I is highlighted [D].
5.
Press the cursor
Language is highlighted [D].
6.
Press the
language is displayed.
7.
Press the Menu button twice to
close the OSD.
7
A
DJUST
1.
To raise the level of the
projector, lift the projector [A]
and press the height-adjuster
button [B].
The height adjuster drops down
[C].
2.
To lower the level of the
projector, press the height-
adjuster button and push down
on the top of the projector.
3.
To adjust the angle of the picture
[D], turn the tilt adjuster right or
left until desired angle has been
achieved.
2 8
A
DJUST
1.
Use the Image-focus control to
sharpen the projected image (A).
2.
Use the Image-zoom control to
resize the projected image and
screen size (B).
' s G u i d e —
' s G u i d e —
button until
button until
until your
P L
ROJECTOR EVEL
I V
MAGE AND OLUME