Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1) SERIES 520 GENERAL DESCRIPTION
The clear trend towards the use of strobe light systems for emergency vehicle
signalling creates a need for new more powerful and versatile power supply units.
The SERIES 520 power supply units, with a programmable internal configuration,
have 4 outputs so as to be able to control from one to four strobe lights. (For the motorbike
version FA-520/M model, only 3 outputs are used). This version also has 6 function modes
which allow the lights which are required and the kind of multiple flash to be selected.
The power supply unit comes with a standard program, which allows the different
function modes to be selected by means of 3 external switches. The unit also has a high/low
intensity function which can be selected by means of a switch.
With an effective power of 50 W, it can be considered as a high performance device.
The electronic circuit is controlled by a microprocessor which can be programmed in
the factory with other special function modes if circumstances so require.
Two versions of the program exist within the SERIES 520:
Model FA-520: Version for cars.
Model FA-520/M: Version for motorbikes.
2) MODEL FA-520/M (Version for Motorbikes)
Model FA-520/M is a power supply unit especially programmed for the emergency
lighting equipment of motorbikes, consisting of two front strobes and one omnidirectional
rear strobe head.
2.1) SPECIFICATIONS
Input voltage:
Output power:
E n e r g y :
Number of outputs:
Function modes selection:
Flash frequencies:
(See table in wiring diagram)
Mode of operation in high or low intensity.
W e i g h t :
FA-520/M POWER SUPPLY
12 Vdc - 24 Vdc
50 W.
Double flash:
Quadruple flash:
3 (J3, J4, J5)
3 external switches (6 function modes)
69 Quadruple flashes per minute
138 Quadruple flashes per minute (rear strobe head only)
132 Double flashes per minute
750 grammes.
17.4 J. (main flash)
6.0 J. (secondary flash)
10.0 J. (main flash)
4.3 J. (secondary flashes)
7
Tabla de contenido
