Trevi Sound Pad 360 Manual Del Usario página 24

Tabla de contenido
1
2
3
4
BATTERY MANAGEMENT AND RECHARGING
a. Recharge the battery about 4 hours to make sure the battery is fully charged at the first
time.
b. Plug in the power charger provided in the accessory pack to the DC 12V (13) located
on the back side of the device and connect the power charger to a proper power socket.
Once the power is connected, the battery recharging icon will appear
bar which indicating that the device is under recharging. When the power recharging
icon will turn to blue entirely when the battery is fully recharged and you can disconnect
the power charger from the device.
Note
In order to keep the battery in the best condition, please pay attention to the below:
Don't recharge the device under high temperature.
Don't release the power of the battery, you can charge the battery when there is still power in the
battery. It is not necessary to wait the battery to completely run out before recharging.
To maintain the battery with a long life span, keep recharging the battery once every two weeks in
the case if you don't use the device for a long time.
1. Standby
2. OK
5
3. Edit/Unlock
6
4. VOL-
7
5. Mute
8
6. Navigation
9
7. Switch
10
8. Back
9. VOL+
10. Play/Pause
24
Sound
Pad 360
on the status
Tabla de contenido
loading

Tabla de contenido