Hawke 46102 Manual Del Usuario página 13

arrows to move between Hours and Minutes – Use the up and down arrows to edit the selected
number – Press "OK" to confirm.
Car Plate
Captures car license plates when still or moving. Note: The "PHOTO"/"VIDEO"/"BOTH" mode
button on the camera must be on "PHOTO" mode. The camera has several shutter speed levels.
Choose between 1/60s, 1/125s, 1/250s, 1/500 and 1/1000s. 1/1000s is the fastest shutter speed,
intended for fast moving cars. You can also select "OFF" to close this function. SETTINGS –
Advance – Car Plate – Use the left, right, up and down arrows to move between OFF, 1/60s,
1/125s, 1/250s, 1/500s and 1/1000s – Press "OK" to confirm.
IR Flash
Sets the brightness of the infrared flash. There are three options: Full Light, 2/3 Light and 1/3 Light.
Choose Full Light to get the brightest image or to reach far targets. Select 2/3 Light or 1/3 Light to
save battery or for targets closer to the camera. SETTINGS – Advance – IR Flash – Use the left
and right arrows to move between Full Light, 2/3 Light and 1/3 Light – Press "OK" to confirm.
SETTINGS: SYSTEM
Camera ID
Sets the name of the camera, which is stored on each photo and video. The Camera ID is six
characters long and can be set from A-Z, 0-9. SETTINGS – System – Camera ID – Use the left
13