Lens A08Z08NDDC(Po) und F06Z08NDDC(Po):
a) Disconnect the lens from all the power.
b) Unscrew the fixing screws on each side.
c) Remove the sticker on both sides: there are
3 fixing screws underneath each sticker.
d) After unscrewing the fixing screws remove the
housing cover.
To reassemble use, the sequence as described
above is reversed.
®
eneo
is a registered trademark of Videor Technical E. Hartig GmbH
VIDEOR TECHNICAL E. Hartig GmbH (U.K. Branch)
Unit 14, Campbell Court · Campbell Road, Bramley, Tadley
GB-Hampshire RG26 5EG
Tel. (0 12 56) 88 02 20 · Fax. (0 12 56) 88 00 89
www.eneo-security.com
1/4" - 20
31.5
91.8
17.5
VI Remote Control Units
For applicable remote control units see our
product catalog.
64
Dimensions: mm
# 991054
Technical changes reserved.
© Copyright by VIDEOR TECHNICAL 04/01