Lilin iMEGAPRO IPR722ES Guía De Instalación Rápida página 5

Top Cover
Bottom Chassis
Bracket
Pan Adjustment Screw
Tilt Adjustment Screw
Lens
RJ-45 Network Port (Support PoE)
DC12V Power Input Jack (DC12V±10%)
Reset Key
To restore the server to factory default setting.
Network Indicator LEDs
Green(LINK): Network connection. This LED lit.
Orange(ACT): Data communications. This LED flashes.
Installation
1. Take out the IP camera from the box. Connect the network
cable to RJ-45 network port and connect power cable to DC
power input jack of the IP camera (FIG.1). Then fix bracket to
the wall (FIG.2).
- 2 -