Emptying The Tank; Continuous Drainage - Rowenta Vitality DH3110 Modo De Empleo

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
"DRY" Function for Drying clothes (
) (Mod DH4010 & DH4020)
GB
Press the DRY button (D) to turn on the laundry drying function.
3rd higher speed, continuous dehumidification and the oscillation of the air outlet grill will come
on automatically for improved clothes drying.
SWING Function (Mod. DH4010 & DH4020)
Press the "SWING" button (E): The air outlet grill will swing automatically, ensuring a better flow of
dry air into the room.
DEFROSTING INDICATOR LIGHT
If the indicator light (I) is lit, the dehumidifier is in defrost mode. The compressor stops and starts
again 8 minutes after the start of the defrost mode.
FULL indicator light
The appliance beeps and the indicator (H) blinks if the water tank is full. The indicator stops blinking
and the dehumidifier starts working again once the tank is emptied and replaced.
FILTER
• Your appliance is fitted with a removable, cleanable filter, which must be cleaned regularly.
• Remove the filter by sliding it outwards and wash it with tap water.
• lways take care to dry the filter before replacing it.
• Never use the appliance without its filter.

EMPTYING THE TANK

When the tank is full:
• The appliance stops and the red, FULL indicator (H) lights up.
• Pull the tank carefully out of the appliance, empty out the water and replace it in the unit.
The red FULL indicator light (H) should turn off after a few seconds.

CONTINUOUS DRAINAGE

Use a PV pipe, 14 mm in diameter.
• Remove the tank from the appliance.
• Unscrew the button (11) at the rear of the unit.
• Remove the cap and connect the pipe to the drainage outlet.
• Ensure that the slope between the 2 ends of the pipe allows water to flow away normally.
• Replace the tank, the Full indicator light goes out.
17
Tabla de contenido
loading

Este manual también es adecuado para:

Vitality linendry dh4010-4021

Tabla de contenido