Connecting To The Fixed Telephone Network; Installing The Phone Base; Switching On The Bluetooth Phone Base - Parrot CONFERENCE Información De Uso Y Guía De Usuario

Sending cOntactS
To access your contacts directly on the Parrot CONFERENCE, you must first send the contacts
by bluetooth from your bluetooth phone.
• Manually sending contacts to the private and public phonebooks
• go to the «settings» menu.
• select the «Contacts management» submenu and confirm.
• select the private or public phonebook.
• select the «Receive contacts» option and confirm.
• The Parrot CONFERENCE and the phone disconnect - the device is now ready to
receive contacts.
• On your phone, select the contacts and send them by bluetooth to the Parrot
CONFERENCE (refer to your phone's user guide or visit the support heading on our
website at www.parrot.com ).
• Automatically sending contacts to the private phonebook
• go to the «settings» menu.
• Press the scroll wheel or the green button, select the «Contacts management» submenu
and confirm.
• select «Private phonebook» and confirm.
• select the «Phonebook synchro» option and confirm.
• The contacts are automatically sent from your phone to the private phonebook
on the Parrot CONFERENCE by bluetooth (refer to your phone's user guide or visit the
support heading on our website at www.parrot.com
Note: the feature for automatICally seNdINg CoNtaCts Is oNly avaIlable for
the PrIvate PhoNebook.
Note: the use of CertaIN features (seNd CoNtaCts by bluetooth, automatIC
CoNtaCt syNChroNIsatIoN) dePeNds exClusIvely oN your PhoNe (suPPort of the
haNds-free or headset ProfIle). refer to the suPPort headINg oN our websIte at
www.parrot.com for further INformatIoN.

ConneCting to the Fixed telePhone network

Installing the Phone Base

Connect the RJ11 cable to the ExT socket on the Parrot PhONE bAsE and plug the other end
of the cable into a phone socket. similarly, you can connect a wired phone by plugging your
phone's cable into the lINE socket on the Parrot PhONE bAsE.

Switching on the Bluetooth Phone Base

Connect the charger to the bluetooth phone base and then plug it into the mains.
The orange and blue lEDs light up and then switch off, and the green lED stays on.
).
11