ASROCK K8SLI-eSATA2 Manual Del Usuario página 23

2. If you plan to install two eSATAII devices to this motherboard, you need to
enable both the top and the bottom eSATAII ports of the I/O shield. In order to
enable the top and the bottom eSATAII ports of the I/O shield, you have to
connect the red SATAII connector (SATAII_RED; see p.2 No.10) and the red
eSATAII connector (eSATAII_BOTTOM; see p.2 No.38) with a SATA data
cable first, and then connect the orange SATAII connector (SATAII_ORANGE;
see p.2 No.11) and the orange eSATAII connector (eSATAII_TOP; see p.2 No.
37) with another SATA data cable. After that, both the top and the bottom
eSATAII ports of the I/O shield are enabled.
Connect the SATA
data cables to both
red SATAII connector
(SATAII_RED)
and orange SATAII
connector (SATAII_
ORANGE)
Please make sure to correctly connect the SATAII and eSATAII connectors
with corresponding color so that the eSATAII function will work successfully.
3. Use the eSATAII device cable to connect eSATAII device and the eSATAII port
of the I/O shield according to the eSATAII port that you enable.
Connect one end of the eSATAII
device cable to eSATAII device
ASRock K8SLI-eSATA2 Motherboard
Connect the SATA
data cables to both
red eSATAII connector
(eSATAII_BOTTOM)
and orange eSATAII
connector (eSATAII_TOP)
Connect the other end of the eSATAII
device cable to eSATAII port of the I/O
shield
2 3 2 3 2 3
2 3 2 3