O'Fresh 077 Manual De Instrucciones página 9

FEATURES:
1. This high performance mist Fan has an Epoxy coating to preserve against corrosion.
2. The misting and blowing is a combination of two different electric motors. High quality
bearings keep a stable performance, moderate temperature, low noise and continuous
usage.
3. With an advanced misting system, the mist volume can be adjusted. The water pump and
float switch will cut out when the water supply has been reduced to the minimum level for
operation.
USAGE:
See overleaf for a drawing of the assembly instructions.
 Open the water tank cover, fill the tank with clean water and then close the cover.
 Connect the fan and water pump switches and then connect the power supply. You can
also asjust the mist level if required.
 The speed switch reads as follows:
 In attachement to setting '2' (medium), you will see a pucker handle. When using it, press
the button in the handle to open, then repress the handle.
 To adjust the oscillation, please wait for the blade to stop, and then disconnect the power
. Please note: the fan will not oscillate if the adjusting screw is set at the centre hole of the
oscillating fixture. See attachment 2.
MAINTENANCE:
 If outside, keep the fan covered with a tarp or plastic bag to protect from dust or rain.
 To ensure the fan has a long lifespan, remember to replace the gearbox oil, bearing oil and
other rotary parts approximately once a year (each 2000hours)
 Keep the fan clean, remembering to turn the power off first!
 Clear the pump regularly in order to make it running smoothly. Supply clean water for the
water tank and clean the water tank timely
 Clean the fan and seal the whole machine with plastic bag and put it in dry, ventilating
place, when it is not used for a long time
'0'
OFF
'1'
LOW
'2'
MEDIUM
'3'
HIGH