Pleasant Hearth OFW827T Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
3. Attach Vertical Bars (G) to the Table Top (E)
by inserting M6 x 10mm Bolts (AA) through the
Vertical Bars (G) and into the pre-installed nuts
on the Table Top (E). Attach the Vertical Bars
(G) to the Long Bottom Bars (H) by inserting the
bolts (AA) through the Vertical Bars (G) and into
the pre-installed nuts on the Long Bottom Bars
(H). Secure all bolts, but do not tighten at this
time.
Hardware Used
M6 x 10mm Bolt
AA
4. Attach the 4 Side Panels (N) to the Legs (K) and
the Vertical Bars (G) by inserting the M6 x 10mm
Bolts (AA) through the holes in the interior lip of
the Side Panels (N) and into the pre-installed
nuts on the Legs (K) and on the Vertical
Bars (G). Secure all bolts, but do not tighten at this
time.
Hardware Used
AA M6 x 10mm Bolt
5. Attach the two Log Rack Panels (I) to the
Legs (K) and Vertical Bars (G) by inserting
M6 x 10mm bolts (AA) through the holes
in the Log Rack Panels (I) and into
the pre-installed nuts on the Legs (K)
and Vertical Bars (G). Secure and tighten
bolts. Tighten all bolts of previous steps.
Hardware Used
AA M6 x 10mm Bolt
3
E
x 6
4
x 16
5
x 8
5
H
G
AA
G
K
G
K
AA
N
AA
I