How It Works - Joycare JC-336 Manual Del Usuario

Note: Do not mix new batteries with old ones. Always use batteries of the same kind. If the
product is not used for a long period of time, remove the batteries.

HOW IT WORKS

This product is designed to remove skin thickenings, callosities and corns in an easy, quick and
painless way, and keep your healthy skin unchanged at the same time. The product may be used
on either wet or dry skin. Callosities are easily removed if your skin is dry. When using it on dry
skin, your skin should be dry and defatted.
Carefully wash the affected area, then dry it with care.
The callosities removal should be used only on your feet and not on other parts of your body.
Do not use on abrasions, wounds, sensitive skin.
Use the exfoliating roller most suitable to the affected area:
- Violet roller (fine-grained) for delicate areas
- Gray roller (coarse-grained) for difficult areas
To insert/replace the roller see paragraph "replacing sanding rollers".
Remove the roller lid. Turn on the device by pressing the security button (D) and, at the same
time, let the turn on button (E) slide upwards.
Then, slide the roller carefully (backward and forward, to the left and to the right) on the affected
areas (callosities, thickenings) for 2-3 seconds. Turn the device off and check the degree of
softness you have reached after the treatment. If it not enough, use the device again and go on
that same area again by following the previous instructions. Check again and, if needed, keep on
treating the same area until you reach the desired softness.
Once you finished, turn the device off.
WARNING
Do not press excessively on the affected area! For a better protection, the device is
equipped with a sensor that automatically interrupts the roller rotation in case of
excessive pressure.
In case of skin irritation, inflammation or reddening, interrupt the treatment.
12