Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. CONFIGURING AND PAIRING WITH THE SYSTEM
ELDES
Configuration
software
If you are unable to pair the wireless device, please restore the parameters of the wireless device to default and try again (see 7.
RESTORING DEFAULT PARAMETERS for more details.)
Once the 5-second period after the battery activation has passed, EWP3 device will start indicating the pairing status. Single long
flash of the indicator (approx. 1 sec. length) represents the unpaired wireless device status suggesting the device can be paired
with the alarm system, while the 3 short flashes represent the wireless device that is paired with the alarm system.
3. EWP3 ZONE AND TAMPERS
Upon successful EWP3 pairing process, the system adds 1 wireless Instant zone intended for movement detection.
In case of tamper violation, the alarm is caused regardless of system being armed or disarmed. There are 2 ways to detect tamper violation on EWP3:
By tamper switch. EWP3 comes equipped with 2 built-in tamper switches intended for enclosure supervision:
• one located on the front side of the PCB supervising the front cover in case it is illegally opened.
18
For more details on how to configure and pair the device with the system, please refer to ELDES
Configuration software's documentation or ELDES alarm system's installation/user manual located at
www.eldesalarms.com
EWP3 WIRELESS MOTION DETECTOR v1.1
Tabla de contenido
