Guide Bar; Carbon Brushes; Disposal And Recycling - Blaupunkt CS4000 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8

Guide bar

A small amount of ball-bearing grease should be fed occasionally with a grease gun through the grease holes situated near the four
rivets holding the nose sprocket on the guide bar.
The bottom edge of the bar is exposed to relatively heavy wear and so the bar should be turned top to bottom whenever the chain
is sharpened and at the same time the groove in the bar and the oil holes should be cleaned.
Drive sprocket
If the teeth of the drive sprocket show any signs of wear. the sprocket should be replaced.
The drive sprocket should be changed with every second replacement of the chain.

Carbon brushes

When the chainsaw's brushes are worn beyond a certain limit, a tripping device in the brushes
Automatically stops the motor. The brushes should be replaced by a specialist who has the right equipment. The saw can then be
given a thorough inspection at the same time and the motor be cleaned.
Warranty
This product has 2 Years Warranty for manufacturing defects. The warranty period will be counted from the date of purchase of the
product, according to purchase invoice. Product warranty only covers manufacturing defects, defects resulting from improper use,
such as dropping, improper transportation, connection to the mains power supply not in compliance with the voltage speci ed in
this manual, insertion of foreign objects and natural wear of parts and parts Such as plastic parts (caps, buttons, handles, latch locks,
power cables, etc.) and metal parts (wires, motors, etc.).
Also not covered are damages due to agents of nature, lightning, food, sea, oxidation, humidity etc.). The product will lose its
warranty if it presents defects, which after analysis by our technicians, are characterised as being improperly used, used for
professional use or for the purpose for which it is not intended (according to the Owner's Manual). This warranty will be void if it is
found that the device has been tampered with, has been repaired by a person or service not authorised by Blaupunkt. The
guarantee is only valid with the receipt/invoice provided at purchase.
We undertake to provide the above-mentioned services within the warranty period only in places where it maintains an authorised
service. Consumers not located near an authorised service centre are responsible for the costs and risks of transport to an
authorised service.
Territorial Limitations: Any repair, replacement, or support of the Products provided under the Warranty (or any other support
service o ered in our sole discretion), shall be restricted to, and provided solely within, the Distribution Territory as then in e ect on
the date the Product is delivered to you. If you purchase a Product within a de ned Distribution Territory and later transport the
Product outside of the Distribution Territory, we cannot provide returns, warranty, out-of-warranty, or aftermarket support of any
kind outside the Distribution Territory.
Natural 'wear and tear' is not covered under warranty.
This product is for domestic use only.

Disposal and recycling

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environmental safe recycling.
SAVE THESE INSTRUCTIONS
Tabla de contenido
loading

Este manual también es adecuado para:

Cs4000bqCs4000beCs3000bqCs3000be

Tabla de contenido