Tabla de contenido
Idiomas disponibles
Idiomas disponibles
WR 4200 /1 – WR 4200 /2
MANUAL DE USUARIO
VERSION 2.0
INSTALLATION
Bodypack transmitter (SETTING)
Blocking
Without selecting any previous parameter, press and hold the UP button and press SET, the lock will be
activated showing the lock icon in red on the screen. It cannot do any function except turn on / off. Repeat
the same operation to unlock.
Handheld microphone (SETTING)
Press SET one time, the frequency number blinks, press UP or DOWN buttons to manually change the
frequency.
WR 4200
Manual channel and frequency selection
Press SET once, the CHAN: channel number will blink, press the UP or DOWN
buttons to change the channel that will affect the frequency showed on the
display.
Manual volume selection
Press SET a second time, the number next to VOL will flash, press the UP or
DOWN buttons to change the volume in dB.
Input gain selection
Press SET a third time, the sensitivity value next to the antenna icon will flash,
press the UP or DOWN buttons to change the sensitivity value. (LOW or HIGH)
NOTE: Keep in mind that an increase in this gain implies a greater reduction in
the battery.
www.workpro.es
6
Tabla de contenido
