AEG SNMP Manual De Instrucciones página 5

7. Configure the IP address of the SNMP Adapter
Basic Network Settings
1.
Choose the entry
- System
- Network
at the drop-down menu on the left side.
2.
Enter the values for
- Local Address
- Subnet Mask
- Default Gateway
("DNS-Server", if desired)
3.
Press the button "Apply"
4.
Choose the entry
- Services
- Timeserver
in the drop-down menu.
5.
Enter the „IP Address" of your timeserver and
synchronize the SNMP Adapter with this server.
The timeserver settings are important for the event- /
alarm logging. (If no timeserver is configured the time
will be set to 01.01.2000 00:00).
6.
The changes of each configuration page have to
commit by pressing the button
7.
Choose the point
- Devices
- UPS
- Setup
in the drop-down menu for the UPS configuration.
8.
Choose the „UPS Model", which is connected to
the SNMP Adapter.
9.
Click on the button "Apply"
More Information about the UPS settings are
available in the SNMP Adapter User Manual.
to commit the changes.
"Apply".
to save the changes.
English