Radio Operation - Furrion DV3350 Manual De Instrucciones

Operation
Select a preset EQ mode
Press and hold SEL
EQ
select the preset music equalizer curves:
CINEMA, ROCK, CLASSIC, FLAT, or EQ OFF.
Turn on / off LOUD mode
Press SEL on the front panel once or more
EQ
to select LOUD ON/ LOUD OFF mode.
Adjust the sound equalizer
curves
1. Press on the front panel once or
SEL
EQ
more to select a sound equalizer curve:
VOL, BAS (without preset EQ), TRE (without
preset EQ), BAL, LOUD ON/OFF, LOC ON/
OFF, ST ON/OFF, BEEP ON/OFF, or SUB
ON/OFF.
2. Rotate the VOLUME -/+ knob on the front
panel to select a sound feature.
Select ZONE 1 / 2
Press and hold ZONE 1/ZONE 2 to turn on or
off the audio source in each of the different
areas where your speakers are connected.
The corresponding zone number will be
displayed on the LCD once selected.
Note: ZONE 2 supports independent audio
output control.
•
Press ZONE 2 to activate independent
audio selection mode.
The "ZONE 2" icon will flash on the LCD.
● Select the media source (DISC / USB,
AM / FM, BT, F AUX / R AUX, AV, HDMI),
then adjust the audio effect and preset EQ
independently.
● After setting ZONE 2 audio output, you can
press ZONE 2 to switch back to ZONE 1
audio output control mode.
The "ZONE 2" icon will stop flashing.
If ARC is selected as the media source of
–
ZONE 2 (ZONE 1), the media source of
ZONE 1(ZONE 2) can be selected as AM /
FM, BT, F AUX, R AUX, AV, or ARC.
on the front panel to
If AM/FM or BT is selected as the media
–
source of ZONE 2 (ZONE 1), the media
source of ZONE 1 (ZONE2) can be
selected as DISC / USB, AM / FM, BT, F
AUX, R AUX, AV, HDMI, or ARC.
If USB / DISC is selected as the media
–
source of ZONE 2 (ZONE 1), the media
source of ZONE 1 (ZONE 2) can be
selected as USB / DISC AM / FM, BT, F
AUX, R AUX, or AV.
Reset the unit
In case of incorrect display, button failure, or
distorted sound, you can press RESET with a
pointed object such as a clip to reset the unit
to factory default settings.

Radio Operation

Select a radio region
In radio mode, press and hold AM/FM to
select your desired radio region: USA1,
USA2, AUSTRALIA, or EUROPE.
Select AM/FM band
In radio mode, press AM/FM once or more
to select your desired radio band: FM1, FM2,
FM3, AM1, or AM2.
The selected band will be displayed on the
front panel.
Tune to / search for radio stations
In radio mode:
● Press and hold
panel (or /
control) to automatically search down/up
for an available station from the current
frequency.
● Press /
(or / on the remote control)
to manually search up or down for
your desired station from the current
frequency.
/ on the front
on the remote
on the front panel
18