Important - Bordogna BMZ66SC-CMT-AZZURRO Manual De Funcionamiento

Idiomas disponibles
  • ES

Idiomas disponibles

SETTING THE TIME DELAY WITH MASTER CODE
Time Delay: the time between the first and second code entry in minutes
Opening window: the period of time in minutes during which the code can be entered a second time
and the lock can be opened
Press
Enter the Master Code
Press
Press
within 10 seconds
Enter a 3-digit code of which:
The first 2 digits define the Time Delay in
minutes (from 00 to 99)
The third digit defines the Opening Window in
minutes (from 1 to 9)
Press
Enter the 3 digits again
Press
The door closes automatically at the
end of the operations
PARTICULAR SIGNALS
Wrong operation / code

Exhausted battery
EMERGENCY OPENING
If the battery is completely exhausted, the contacts has oxidised or hasn't
been used for a long time, it is possible to open the lock by powering it from
the outside.
Place a battery (rectangular 9V alkaline type) on the round contacts on the
keyboard, open the lock and substitute the battery inside.
IMPORTANT: do not detach the battery until the lock is fully opened
(wait for the four beeps signalling "OK opened").
BORDOGNA CASSEFORTI · Viale Europa, 37 - 25036 Palazzolo sull'Oglio (BS) - ITALY · Tel. +39 030 7406011 · Fax + 39 030 7401649 · email: [email protected] · www.bordogna.com
85.012.175 - rev. 02/16
ELECTRONIC LOCK BMZ66SC-CMT-AZZURRO
     
 

Right Master code
Wrong Master code

For example 17 minutes Time Delay and 8 minutes
Opening Window:
  

Right operation
Wrong operation
For example:
  

Right operation
Wrong operation
ENABLE / DISABLE USER CODE
Press
Enter the Master Code
Press
,
and
Press:
to disable the User Code
or
to enable the User Code
Press
PARTICULAR CASES
THE LOCK DOEs NOT OPEN
The lock does not emit any audible tone at all: the battery is exhausted.
Open the lock following the procedure "Emergency opening".
The lock emits 4 beeps that mean "OK opened" but fails to open completely,
and if other keys are pressed an error signal is emitted: press
closes again.
USER MANUAL
72.010.214
     
 
 

Right Master code
Wrong Master code
or

Right operation
Wrong operation
(Not enabled/disabled code)
, the lock
loading

Este manual también es adecuado para:

72.010.214