Hergom CRETA Instrucciones Para Instalación, Uso Y Mantenimiento página 33

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

VlI.- TECHNICAL SPECIFICATIONS.
Standard stove built in accordance with the specifications of regulation UNE-EN
13240:2002 "Solid fuel stoves – Requirements and methods of testing", amended
by UNE-EN 13240/AC and UNE-EN 13240:2002/A2.
The CRETE model stove
Useful power released into the environment
Load mass / hour
Average temperature of gas below the water level of the outlet valve
Average concentration of CO at 13% O2
Performance
Nº OF TEST CERTICATE
Nº OF ORGANISATION NOTIFIED
Length of wooden logs admitted:
Metal chimney (suspended) Diameter of sheet steel tube
Metal (wall) chimney
Recommended height of chimney
Smoke exit
Recommended minimum draft
Control of primary air
Weight
(*) We can supply a 164¬, -200¬, adaptor as an optional accessary.
WARNINGS! The stove must not be used as an incinerator and no other fuel (plastics, coal
etc.) may be used. You must use the recommended fuel.
The wall beheind the fireplace should be category M0 / A1 at least up to 50mm on either
side of the centre of the fireplace and from the floor to the ceiling. M0 /A1 material should
be top quality, preferably brick or refractory concrete/cement or fireproof drywall paneling
that is not affected by heat. Any paint or material applied must be category M0 and resist
temperatures above 150ºC.
The fireplace should be attached to the wall in such a way that the fixing system is
attached to bricks or blocks. If attached directliy to a cement wall, the heat may cause the
material to collapse and the fireplace would cease to be securely attached to the wall.
Recommended fuel:
Fuel
Beech
Oak
Pine
Your CRETE stove must not be used continuously.
Chimney
Diameter of sheet steel tube
Chimney
Dimensions L x Ø
40cm x 7cm (approx.)
40cm x 7cm (approx.)
40cm x 7cm (approx.)
33
12.7 kW
3.7 kg
290 ºC
0.26
84%
LEE-C-083-08
NB 1722 (CEIS)
400 mm.
164 mm.*
200x200 mm.
200 mm.*
250x250 mm.
5 to 6 metres
Vertical
12 Pa
Manual regulation
183 Kg.
Maximum load per hour
3.7 Kg.
3.7 Kg.
3.7 Kg.
Tabla de contenido
loading

Tabla de contenido