16. With the pilot holes as a guide, align and attach one Guardrail Support (R) to the center of the Long
Guardrails (P) and the Upper Mattress Side Rail (N) by using three 30 mm Screws (10) through the
countersunk holes and screw into place.
17. Repeat the same procedure to attach the other Guardrail Support (R) to the Short Guardrails (O) and the
Ladder Side Rail (M).
UPPER BUNK ASSEMBLY
Ø4 mm x 30 mm Screw
(6 used in this step)
14
⑩