ASROCK K10N750SLI-110dB Manual Del Usuario página 38

A. NVIDIA RAID Driver (required)
B. NVIDIA nForce Storage Controller (required)
Please select A and B for Windows
drivers needed for RAID mode, you have to select them separately. Please specify the
first RAID driver and then specify again for the second one.)
NOTE. If you install Windows
(create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs, you still
need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then, please set the
RAID configuration by using the Windows RAID installation guide part of the
document in the following path in the Support CD:
.. \ RAID Installation Guide
2.15.2 Installing Windows 2.15.2 Installing Windows 2.15.2 Installing Windows 2.15.2 Installing Windows 2.15.2 Installing Windows
RAID F RAID F RAID Functions unctions unctions unctions
RAID F RAID F unctions
If you want to install Windows
HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows
Insert the Windows ® Vista
to boot your system, and follow the instruction to install Windows
TM
Vista 64-bit OS on your system. When you see "Where do you want to install Windows?
" page, please insert the ASRock Support CD into your optical drive, and click the "Load
Driver" button on the left on the bottom to load the NVIDIA
drivers are in the following path in our Support CD:
.. \ I386 \ Vista32_RAID (For Windows
.. \ AMD64 \ Vista64_RAID (For Windows
After that, please insert Windows
the optical drive again to continue the installation.
NOTE. If you install Windows
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then, please
set the RAID configuration by using the Windows RAID installation guide in the
following path in the Support CD:
.. \ RAID Installation Guide
3 8 3 8 3 8
3 8 3 8
ASRock
® XP / XP 64-bit in RAID mode. (There are two RAID
® XP / Windows ® XP 64-bit on IDE HDDs and want to manage
Vista Vista Vista Vista Vista / Vista / Vista / Vista / Vista / Vista
TM TM TM TM TM
®
® Vista TM / Windows ® Vista
Advanced screen
® Vista TM / Vista TM 64-bit OS on your system.
TM / Windows ® Vista TM 64-bit optical disk into the optical drive
® Vista TM OS)
® TM
Vista 64-bit OS)
® TM
Vista / Windows
® Vista TM / Windows ® Vista
K10N750SLI-110dB Motherboard
64-bit With 64-bit With 64-bit With 64-bit With 64-bit With
TM TM TM TM TM
TM 64-bit on your SATA / SATAII
IDE Configuration.
® Vista TM / Windows
® RAID drivers. NVIDIA ® RAID
® TM
Vista 64-bit optical disk into
TM 64-bit on IDE HDDs and want to
®