Dmx Linking - Chauvet Professional COLORADO 1-QUAD IP Guía De Referencia Rápida

COLORado™ 1-Quad IP QRG
AC Power
Power Linking
AC Plug

DMX Linking

DMX Connection
Master/Slave
Connection
Mounting
Product
Mounting
Diagram
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product from power via breaker
or by unplugging it.
You can link up to 11 COLORado™ 1-Quad IP products at 120 V, 19 at 208 V,
or 21 at 230 V. Never exceed this number.
Connection
AC Live
AC Neutral
AC Ground
The COLORado™ 1-Quad IP will work with a DMX controller using a regular
DMX serial connection.
www.chauvetprofessional.com.
The COLORado™ 1-Quad IP uses a regular DMX data connection for its
DMX personalities: TOUR, TR16, FULL, ARC.1, AR1.D, ARC.2, AR2.D,
AR2.S, PIX1, PIX2, and HSV. See the User Manual to connect and configure
for DMX operation.
Note: For optimum control of the 16-bit dimming channels in the TR16 and
FULL personalities, be sure that both dimming curves in SET > DIM and
SET > CURV are set to OFF.
The COLORado™ 1-Quad IP uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Before mounting this product, read the
clamp is capable of supporting the weight of the product. For our Chauvet line
of mounting clamps, go to
clamps/.
Overhead Mounting
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
A DMX
Safety
trusst.com/productcategory/base-plates-accessories-
Mounting Clamp
Safety Cable
Secure the safety cable using
the passageway on the back
of the product
3
Screw Color
Brown Yellow/Brass
Blue
Green
Primer is available
Notes. Make sure the mounting
Floor Mounting
EN
Silver
from