Tabla de contenido
Idiomas disponibles
Idiomas disponibles
User Manual
Your smart bracelet can be used individualely to record daily activity data. It also can be used as a Bluetooth device
through a application SmartGear to implement more functions, such as check history activity records, incoming call
notification, messages notification, recomte control camera or music, search mobile phone or anti lost etc.
Charging Your Smart Watch
Please charge your Smart Watch fully before using it the first time. In order to charge correctly, please follow the
following steps:
1. Remove the body of the watch from the wristband.
2. Connect the body to your computer or adapter with the provided special USB cable.
NOTE: The Smart Watch has a built-in lithium battery, to maximize the working life, please use suitable power to charge.
(Suggested Output: DC5.0V, 300mA, such as a computer USB port). It may take about half an hour for a full recharge.
Using Your Smart Watch
Button Functions:
- Short press: turn on the display / turn to the next function of a same interface / stop vibration of a notification.
- Long press: power on/off; switch to another interface / confirm/enter
Functions
1st Level - Icons and Functions:
Short press the button you can check the data one by one.
Time: This interface display time, battery and bluetooth connection status. The smart bracelet
will take over the time of your smartphone once connected. When the bluetooth icon is
showing, Smart Watch is connected to your smartphone. When the sleep icon is showing, it means the sleep monitoring
function is on.
Date: The smart bracelet will take over the date of your smartphone actomatically once
connected.
Step: Display the amount of steps you have taken today.
Note: when sleep monitoring mode is ON, no steps will be counted.
Calorie Mode:
Display the amount of calories burned today.
Distance: Display the distance traveled today. The default step length is 70cm(≈28inch). You can set your step
length in the APP and sync it to the Smart Watch so that the monitoring is more precise.
2nd Level - Icons and Functions:
To use these functions you need to connect a smartphone first. Long press the button in first level to see the options of
the second level. Short press to switch between functions, long press to enter the selected function.
Remote shutter: Short press to open the camera, and short press again to take pictures.
Note: You need to keep the APP running to be able to control the camera.
MP3 playback control: short press to switch between „last title", „on/off", „next title". Long press to operate a
command.
Sleep monitoring: Monitors the quality of sleep. Turn on the sleep monitoring before sleep, and turn off when
you wake up. Tap Synchronize to send the data automatically to your smartphone, then you can check awake
time, light sleep time and deep sleep time.
Search mobile phone: Use this function to search for your smartphone. Press the button to activate this
function and the smartphone will ring/vibrate when you search in the effective distance of Bluetooth (around
10 meters/33 feet).
More Icons and Functions:
These functions can be only workable after connected with a smartphone and the incons only showed when the func-
tions activated. You can set ON/OFF of these functions from Setting of APP.
- Anti lost: When the distance between your Smart Watch and smartphone becomes too big and they are out of the
bluetooth range (approx. 10m / 33ft), the Smart Watch will vibrate before disconnects from smartphone and the
smartphone will alert.
Phone call notification: This icon will show up when there is an incoming call on the connected smartphone
(on some Android devices, the Smart Watch will display the incoming call number ), meanwhile the bracelet will
vibrate.
When below icons shows and the Smart Watch is vibrating, it indicates there is a new message on your smartphone.
(Not yet workable for iOS )
Sms;
Whatsapp;
Application SMARTGEAR
Mobile requirement: iOS 7.0 and above or
Android 4.3 and above, with
Bluetooth 4.0 and above.
Installing
The application SmartGear can be downloaded on App Store & Google Play by scanning the below QR Code or input
SmartGear (s-gear for iOS) and search directly. If you already have installed the APP, you can check for available updates
to make sure you have the latest version.
The data of your activities can be synchronized from the Smart Watch to your smartphone automatically and wireless
after you intalled and connected to the SmartGear APP to your smartphone. You can check latest status and history
records on your smartphone.
Initial Setup and Smart Watch Pairing
Your smart bracelet must be paired directly through the APP SmartGear to sync the data.
Note: The language of the APP will be the same as your smartphone.
If the lanaguage of your smartphone is not available in the APP yet, the APP will be in English. Daily activity data will sync
automatically after connected, sleep data will need manually sync.
1. Turn on your smart bracelet.
2. Turn on the Bluetooth of your smartphone.
3. Tap SmartGear on your smartphone to launch the APP and begin the initial setup.
4. Register: Input your email and password to create your account. (optional)
5. Pairing: Tap the More Option icon
Tap icon ‚+' behind your smart bracelet name ‚smart bracelet' to connect. The band icon will turn to green when
connected. If you tap the green band icon, the smart bracelet will vibrate if connected.
6. Press the more Option icon
NOTE: The default stride length is 70cm/28inches. Unit options Metrix and US are available. To measure your stride length,
you can walk 10 steps, measure the distance and divide by10.
The smart bracelet will be banded with the account automatically once connected.
NOTE: Other smartphones could not connect with this Smart Watch as long as it is connected with a former account.
To connect it with another smartphone and a different account, please make sure this Smart Watch is not banded
with another account.
Note: For iOS version, Banded list is under More Option>Bluetooth Devices>My Device.
7. Goals: Enter your personal goals of steps, distance, calories and sleep time.
8. Synchronize: tap this item to sync history records and sleep data.
Note: The Smart Watch itself can keep the records of last 7days. If the Smart Watch is out of power and turns off automati-
cally, the data will be deleted (but the data you have synchronized to the APP will be still kept on APP.)
If you reboot the smart bracelet manually, the data displayed on the Smart Watch will restart from 0 but the records
happened before reboot are still in the Smart Watch, you can still sync the history to your APP.
9. Notification Settings: You can set the notifications on/off in the APP.
FAQ
Is this bracelet waterproof?
Why I could not find or
connect with the bracelet?
What happen when 42002
or 42003 Error pop out?
Why could not get
phone call or message
notifications?
Why I could not download
or install the application
SmartGear with my phone?
Why my Smart Watch could
not record the steps when
I walk?
Why the steps on bracelet
is same to smartphone
but calorie and distance
are not?
Note: The provider of the APP reserves the right to improve product, product's specification, APP and design. If any change, the
information is subject to changes without prior notice.
Important! If batteries are not discharged completely, do not dispose.
Skype;
Facebook;
->Bluetooth Devices, then tap bluetooth icon
->Peronal Info to input your personal information and tap Sync to Smart Band.
It's sealing design is resistant to splash and rain, but not suggest to put it in water or
wear when swim or shower.
The Smart Watch may be connecting with with another smartphone. Please discon-
nect it first and clean it from last account banded list. If still not work, please reboot
smartphone and bracelet to try again.
The bracelet may be banded with another account or connected to more than 1 smart-
phone without login. Please disband from another account and login your account.
Please check if the notifications are opened in APP. iOS may not support message
notification.
Smartphone needs to be iOS 7.0 and above or Android 4.3 and above, with Bluetooth
4.0 and above. Please check if your phone meets this requiremens.
Please put the bracelet on your hand to monitor steps. To avoid misdetect, the
bracelet will not take record when the activity is less than 10 steps. And please make
sure Sleep monitoring mode is OFF.
The step length may be reset in personal info on APP but not sync to bracelet so the
calculations are different between two devices. Please sync personal info to the
bracelet.
Twitter;
Line;
to search Bluetooth devices;
QQ;
WeChat
Tabla de contenido
