Getting Started With Hyperdeck Extreme Control - Blackmagic Design HyperDeck Extreme 8K HDR Manual De Instalación Y Funcionamiento

There are four different status modes for the cache:
Standby The cache icon information will be white when the cache is in standby mode
Recording The cache icon will be red during recording and the duration indicator will
reduce as the space is filled. If you have fast storage media connected with
usable space, the duration indicator may not appear to move much as the
storage media can copy files as fast as your cache can record them. If you are
using slower media or you have run out of space, the available cache duration
will decrease.
Stored If you run out of available on space on your connected storage media, the cache
icon will flash green and white until sufficient storage is connected and the
information stored on the cache is transferred over.
Transferring The cache icon will illuminate green while the cache media is being transferred
to CFast or USB-C external storage. Due to the nature of how the cache records,
this process can be very quick depending on your storage media.
If your media runs out of available storage space, the recording will continue to
the cache until the media is swapped.
Getting Started with
HyperDeck Extreme Control
HyperDeck Extreme Control is a remote control panel that lets you control up to 8 HyperDeck
disk recorders or broadcast decks from a single control panel.
All playback and record units are controlled via the RS-422 connections on HyperDeck
Extreme Control's rear panel.
If you have previously used broadcast decks with a search dial and edit controls, then
HyperDeck Extreme Control will feel very familiar to you. The controls follow a similar layout, so
you can operate the unit comfortably with confidence. The search dial even has a mechanical
clutch built in giving you a tactile response when using the shuttle or position modes.
This section of the manual will show you how to get started with your HyperDeck Extreme
Control, including plugging in power, connecting a HyperDeck Extreme 8K HDR, and making
sure the 'remote' button is enabled so you can control the unit remotely.

Getting Started with HyperDeck Extreme Control

52