Nova Mix Power Deluxe Instrucciones De Uso página 10

Using the hand mixer
See figure 3.
1 Press the whisk into the drive so that it
clicks into place.
2 Place the drive and the whisk on the
motor housing and rotate it
anticlockwise until it clicks into place.
3 Place the ingredients in the mixing bowl
or in a dish. The dish must have edges
that are high enough to prevent the
ingredients from splashing. When using
liquid ingredients fill mixing bowl for
maximum 50% to prevent the
ingredienst from splashing.
4 Insert the plug into the plug socket.
5 Use the speed regulator to set the speed.
Start at a slow speed and increase the
speed once the whisk is in the
ingredients. This will prevent splashes.
6 Push the whisk into the ingredients and
turn on the appliance using the On/Off
switch.
For extra speed, you can use the turbo
On/Off switch instead of the normal On/
Off switch.
7 Move the rotating whisk through the
ingredients.
8 Turn off the appliance once you have
achieved the desired result.
9 Remove the plug from the plug socket.
10 Rotate the driver clockwise to remove it
from the motor housing.
11 Pull the whisk to remove it from the
drive.
12 Clean the used parts before storing
them (see 'Maintenance and cleaning').
Using the universal mill
See figure 4.
1 Place the mill's container on a stable
surface.
2 Hold the chopping knives by the
rotating shaft and place them in the
middle of the container.
Make sure the rotating shaft can easily
rotate.
3 Place the ingredients in the container,
but not above the 'MAX.' indicator line.
Cut large pieces into smaller pieces
before placing them in the container.
4 See figure 5. Place the sealing lid on
the container so that the spout stop is
next to the spout and slightly to the right
of it. Rotate it anticlockwise until it clicks
into place. Now the spout stop closes
off the spout completely.
5 Place the drive on the motor housing
and rotate it anticlockwise until it clicks
into place.
6 Place the motor housing and the drive
on the sealing lid so that the rotating
shaft sits in the drive.
7 Insert the plug into the plug socket.
8 Use the speed regulator to set the
speed and turn on the appliance using
the On/Off switch.
For extra speed, you can use the turbo
On/Off switch instead of the normal
On/Off switch.
The mill works very quickly. The
ingredients will be ground within a few
seconds. The longer the mill is turned
on, the finer the ingredients will be
ground.
9 Add any liquid or oil through the holes
in the sealing lid.
10 Turn off the appliance once you have
achieved the desired result.
11 Remove the plug from the plug socket.
12 Remove the motor housing and the
drive from the sealing lid.
13 Rotate the drive clockwise to remove it
from the motor housing.
14 Rotate the sealing lid clockwise to
remove it from the container.
15 Clean the used parts before storing
them (see 'Maintenance and cleaning').
Tips for using the mill
Carrots
• Maximum weight: 100 grams.
• Grate the carrots and cut them into 2 cm
pieces.
• Processing time: 15 - 20 seconds.
Mix Power Deluxe Article 220130
7