Uploading And Downloading Data - Paradox Grafica DNE-K07 Manual Del Usuario

5.0 Uploading and Downloading Data

5.1 Download Data from the Memory Key
S [100]
ECTION
Use this section to download Grafica sections [001] to [004], all zone labels,
area labels and user labels from the Memory Key.
1. Insert the Memory Key into the keypad's connector (Figure 8 on
page 35).
2. To download the contents of the Memory Key, enter the keypad's
programming mode (Section 3.1 on page 5) and enter section [100] in
step 5.
3. When the keypad emits a confirmation beep, wait five seconds and
remove the Memory Key after the second confirmation beep.
5.2 Copy Data to Memory Key
S [110]
ECTION
Use this section to copy Grafica sections [001] to [004], all zone labels,
area labels and user labels to the Memory Key.
1. Insert the Memory Key into the keypad's connector (Figure 8 on
page 35). Ensure that the write protect jumper is on (Figure 9 on
page 36).
2. To copy the contents to the Memory Key, enter the keypad's
programming mode (Section 3.1 on page 5) and enter section [110] in
step 5.
3. After the confirmation beep, wait five seconds and remove the Memory
Key after the second confirmation beep.
Remove the Memory Key's jumper if you do not wish to
accidentally overwrite its contents (Figure 9 on page 36).
Only the PMC-3 Memory Key will function with Grafica keypads.
5.3 Updating Grafica's Firmware Version
Update Grafica's firmware version, without physically changing the
microprocessor, by using the Universal In-Field Programmer (UIP-256).
Connect the Universal In-Field Programmer Module to Grafica (Figure 8 on
page 35) and refer to the Universal In-Field Programmer Instructions to
update Grafica's firmware version.
Grafica (English) 9