Battery Replacement - Axis P5544 Guia De Instalacion

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Safeguards
Please read through this Installation Guide carefully before installing the Axis product. Keep the Installation
Guide for further reference.
Store the Axis product in a dry and ventilated environment.
Avoid exposing the Axis product to vibration, shocks or heavy pressure. Do not install the product on
unstable brackets, unstable or vibrating surfaces or walls, since this could cause damage to the prod-
uct.
Only use applicable tools when installing the Axis product; excessive force could cause damage to the
product.
Do not use chemicals, caustic agents, or aerosol cleaners. Use a damp cloth for cleaning.
Use only accessories that comply with technical specification of the product. These can be provided by
Axis or a third party.
Use only spare parts provided by or recommended by Axis.
Do not attempt to repair the product by yourself, contact Axis or your Axis reseller for service matters.
This Axis product shall be used in compliance with local laws and regulations.
The Axis product should be installed by a trained professional. Observe relevant national and local reg-
ulations for the installation.
Transportation
Keep the protective packaging. When transporting the Axis product, the protective packaging shall be
replaced in its original position.
When transporting the Axis product, use the original packaging or equivalent to prevent damage to the
product.

Battery Replacement

This Axis product uses a 3.0 V CR2032 lithium battery as the power supply for its internal real-time clock (RTC).
Under normal conditions this battery will last for a minimum of 5 years. Low battery power affects the
operation of the RTC, causing it to reset at every power-up. A log message will appear when the battery needs
replacing. The battery should not be replaced unless required!
If the battery does need replacing, please contact www.axis.com/techsup for assistance.
Dispose of used batteries according to the manufacturer's instructions.
Risk of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent battery, as recommended by the manufacturer.
Tabla de contenido
loading

Tabla de contenido