AC POWER
You can power your portable system by plugging the detachable AC power cord into the AC inlet at
the back of the unit and into a wall AC power outlet. Check that the rated voltage of your appliance
matches your local voltage. Make sure that the AC power cord is fully inserted into the appliance.
BATTERY POWER
Battery Backup
The clock and alarm settings could be protected by 2 x (not included) 1.5V AA batteries When power
failures. During a power failure, the display will turn off, but the clock will continues to run and the Clock
setting is maintained.
When the electric power supply is restored, the LCD display, the time and also the other function will
return
1.
Remove the battery compartment cover (located at the bottom of the device).
2.
Insert the batteries into the battery compartment.
3.
Close the battery compartment cover.
Notes:
-
Alarm, radio and display do not work on battery power. The batteries are only for DATA Backup
-
Remove the batteries if the unit will not be used for a long time
-
Replace the batteries every 6 months, or when it is empty (depends on the life of the battery).
Danger!
Risk of explosion if battery is incorrectly replaced. Only batteries of the same or substitute an equivalent
type.
POWER SOURCES