Assembling The Axis Panorama Ptz; Hardware Inventory; The Mounting Assembly - Axis Panorama PTZ Guia De Instalacion

Assembling the AXIS Panorama PTZ

4
Assembling the AXIS Panorama PTZ
The information provided in this section will help you unpack and assemble the product
correctly. Please contact your dealer if you find anything is missing or damaged.

Hardware Inventory

The following items are supplied with the AXIS Panorama PTZ:
Item
Network Camera
Power adapter
Power extension cable
Camera Stand
Mounting bracket
Printed Materials
Note:
The power supply for your AXIS Panorama PTZ is country-specific. Please check that the type you
are using is correct.

The Mounting Assembly

The mounting assembly consists of a single bracket, used to join the 2 cameras together,
and a single stand, on which the bracket and the 2 cameras are mounted. See below.
The cameras are mounted as shown here,
one the right way up and the other
upside-down. The underside of each
camera has one screw hole and one
guide hole, so that the bracket can only
be fitted in the correct position.
Although the screw holes in the base of
the stand allow the unit to be fastened to
a wall or ceiling, the cameras must still
be horizontal. This can be achieved by
adjusting the ball and socket joint on the
stand by up to 90
Important!
Please read the important information about outdoor use, on page 7.
Description/type
AXIS Panorama PTZ Network Camera
PS-D
3.3 meters
-
-
AXIS Panorama PTZ Network Camera Installation Guide
AXIS Warranty
o
.
Quantity
2
2
2
1
1
1
1
Screw hole and
guide hole.
AXIS Panorama PTZ
Ball and socket
joint.