Tabla de contenido
UK
Question 1: I have a windows 98 Second Edition PC and there is no CDROM in
the computer but I have another PC. How do I install the drivers?
1. Start another computer.
2. Insert the Nero disc for the ES8DVDRW into the CDROM.
3. Click "Exit" when the Nero Installation screen appears.
4. Click on "My Computer".
5. Click on the "Nero"-logo.
6. Click on the right mouse button and choose "Explore".
7. Go to the directory "Philips Drivers"
8. Copy the contents of this directory on a floppy disc.
9. Attach your ES8DVDRW to your Windows 98SE computer.
10. When Windows asks for the drivers, insert the floppy from step 8 and point windows to
this floppy.
11. The drivers will be installed.You can now use your ES8DVDRW to install the software by
inserting the Install disc.
Question 2: I have a windows 98 Second Edition PC and there is no CDROM in
the computer but I have access to the internet. How do I install the drivers?
1. Start the computer.
2. Start Internet Explorer (or another web browser)
3. Go to the Philips PCStuff website: http://www.philips.com/pcstuff
4. Choose "Drivers and manuals"
5. Search for the ES8DVDRW
6. Download the Windows 98SE drivers
7. Unzip the drivers and remember where you saved the unzipped drivers
8. Plug in the ES8DVDRW
9. When Windows asks for drivers, refer to the location where you saved the drivers in
step 7.
10. Your ES8DVDRW will work now.
Question 3: How do I keep my ES8DVDRW in good shape?
1. Do not expose to moisture, rain, sand or heat.
2. Place it on a firm, flat surface.
3. Keep away from domestic heat and direct sunlight.
4. Give the ES8DVDRW enough place: approx. 2,5cm (1 inch) to all sides is required.
5. Do not place anything on the ES8DVDRW.
Question 4: I have connected the ES8DVDRW to an USB connector but
Windows does not react and the ES8DVDRW is not recognized.
1. Make sure the ES8DVDRW is connected properly to a power outlet.
2. Make sure the USB connectors are switched on (also in the PC Bios, consult your PC
manual).
3. Check if all drivers are installed (run windows update, check your PC manual and download
if required drivers for the PC from the manufacturer's website).
Question 5: Burning or reading takes far too long. How does this come?
1. You have connected the ES8DVDRW to a low speed USB connector, which has a very
limited throughput. Connect the drive to a highspeed USB adapter.
2. You may have to install drivers for your USB-adapter. Consult the manual and or download
drivers from the manufacturer's website.
78
Tabla de contenido
