DIN Rail Power Module Rough-In Enclosure
HQ-DP2-120-CGP2649
120 / 230 V~ 50/60 Hz
The DIN Rail Power Module Rough-In Enclosure
may be either surface-mounted or flush-mounted in
an electrical closet or equipment room. This panel
comes with two pre-installed DIN rail* pieces, along
with an earth grounding bar. The seventeen-inch
enclosure provides a compact housing for mounting
up to two EcoSystem
(LQSE-2ECO-D and LQSE-2DAL-D).
*
This panel is not rated to contain remote power modules.
Specifications
Model Number
HQ-DP2-120-CGP2649: 17-inch enclosure
Capacity
1 or 2 power modules (LQSE-2ECO-D or LQSE-2DAL-D)
Input Voltage
120 / 230 V~ 50/60 Hz
Regulatory
UL, cUL, NOM compliant
Approvals
Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
Environment
Ambient operating humidity: 0 to 90% humidity, non-condensing.
Indoor use only.
Dimensions
Enclosure: 9¼ in (235 mm) x 17¼ in (440 mm) x 3
Cover: 10½ in (267 mm) x 17½ in (445 mm)
Enclosure may be surface-mounted or recess-mounted. Enclosure fits between
Mounting
standard 16 in (410 mm) on-center stud framing. Mount the enclosure so that
line-voltage wiring will be at least 6 ft (1.8 m) from audio or electronic equipment
and wiring.
Construction
Enclosure: 16-gauge galvanized sheet metal (unpainted).
Cover: Painted (black) metal with ventilation holes. Cover is attached using four
phillips-head screws.
Shipping Weight 16 lbs (2.7 kg)
Warranty
http://www.lutron.com/TechnicalDocumentLibrary/HomeWorks_Warranty.pdf
http://www.lutron.com/TechnicalDocumentLibrary/HomeWorks_Intl_Warranty.pdf
Lutron, EcoSystem, and HomeWorks are registered trademarks of Lutron Electronics Co., Inc.
www.lutron.com
product specifications and installation
or DALI Power Modules
®
in (98 mm)
7
⁄
8
1
1.800.523.9466 (USA/Canada)
369795a
Technical Support:
+1.888.235.2910 (Mexico)