Idiomas disponibles
Idiomas disponibles
Diane Tech Switch
RECESED
Recesed 60x60
ELECTRICAL CHARACTERISTICS
Voltage
DEGREE OF PROTECTION
Electrical isolation
Degree of waterlightness
Recesed 60x60
Recesed 30x120
PRECAUTIONS::
• Read this manual before installing the product, if in doubt consult qualified
personnel.
• If the product is damaged, replace it immediately with a new one.
• Turn off the power before installing the product.
• Keep the product out of the reach of small children.
• Do not handle the product while it is in operation and let it cool before
touching it with your hands.
• Do not install the product where there are sources of heat or humidity
concentrations.
• This device must be used with its specified driver.
• Not valid for use in bathrooms.
• For indoor use only.
MOUNTING INSTRUCTIONS:
EMBED:
1. Remove the false ceiling where you want to place the luminaire.
2. Select the color temperature option before connecting the luminaire to
the current.
3. Connect the luminaire to the driver using the quick connector.
4. Connect the general power cable to the driver (see diagram).
5. Place the luminaire in position.
6. Turn on the power.
DISCONTINUED:
1. Drill the holes in the ceiling to put the dowels. Consider the distance whe-
re the suspensions will be placed.
2. Screw part A of the suspension piece to the studs. And then screw part B
to part A of the suspension.
3. Hook the suspensions to the luminaire.
1/5
595
220-240Vac
IP20
CUT
575x575mm
1.175x2725mm
1195
Recesed 30x120
WARNING
BEFORE INSTALLING THIS PRODUCT, PLEASE READ THE
INSTRUCTIONS CAREFULLY AND STORE THEM IN A
SAFE PLACE.
THE INSTALLATION SHOULD BE CARRIED OUT BY
TRAINED STAFF.
INCORRECT HANDLING OF THE PARTS OR THE
LIGHT FIXTURE ITSELF MAY IMPAIR THE PROPER
PERFORMANCE OF THIS PRODUCT. IN THIS CASE,
THE MANUFACTURER GUARANTEE SHALL BE DEEMED
VOID.
THE MANUFACTURER GUARANTEE SHALL BE DEEMED
VOID: IF THE INSTALLATION IS NOT PERFORMED IN
ACCORDANCE WITH THE SPANISH LOW VOLTAGE
ELECTROTECHNICAL REGULATION 2002 (REBT 2002).
THE APPLICATION OF IBC BT09-4 OF REBT (INSTALLATION
OF LINE AND LIGHT FIXTURE SURGE PROTECTORS) IS
ESSENTIAL FOR INDUSTRIAL AND PUBLIC LIGHTING
INSTALLATIONS. THE GUARANTEE DOES NOT COVER
AGAINST DAMAGES CAUSED BY SURGES IN LIGHT
FIXTURES WITHOUT SURGE PROTECTORS INSTALLED.
ATTENTION!!!
OBSERVE
PRECAUTIONS
HANDLING
SENSITIVE DEVICES.
14,5
FOR
ELECTROSTATIC
