Inova peachtree audio Manual De Instrucciones página 6

The lighted rings around the digital input but-
tons will blink until the digital signal is locked
on the DAC.
1 3
2
Input for iPod: Push to hear the digital signal from an iPod connected to the iPod dock on top of the
1)
iNova.
Standby: The iNova is in standby mode when this button glows red. Push to turn on the iNova; the button will
2)
light up blue. When you are finished listening, push again to return to standby mode.
Digital USB Input: Push to hear music from your connected computer or other USB audio source.
3)
Digital Coax Inputs: Push to hear music from a component you have connected via a digital coaxial
4)
cable, such as a CD player, DVD player, Sonos Zone Player, Logitech Squeezebox or other digital
source.
Digital Optical Inputs: Push to hear music from a component you have connected via a digital optical
5)
cable (toslink), such as a CD player, DVD player, Sonos Zone Player, Logitech Squeezebox, Apple TV
or other digital source.
Infrared Remote Sensor: When using the remote control aim it at this sensor for best results.
6)
Aux Inputs: Push to hear music from an analog source such as an FM tuner, tape deck or CD player
7)
that you've connected with stereo RCA cables. (If you want to connect a turntable you may need a phono
preamp - see the Connections page for more information.) To use AUX 2 in Home Theater bypass mode
see the Back Panel page.
Tube window: A blue LED under the tube turns on when the tube is activated. The tube can be bypassed
8)
using the TUBE button on the remote control.
Volume Control
9)
Headphone Output: Standard 1/4" headphone jack. (Use an adapter to connect headphones equipped
10)
with a mini plug.) The audio signal to the speakers is fully muted when headphones are connected.
4 5
6
F r o n t
P a n e l
8
7
4
9
10