Installation; Faucet Assembly/Installation - Presenza QL058 Guía De Instalación Y Manual Operativo

Installation

FAUCET INSTALLATION
Carefully take out all the parts of the faucet assembly .
1 . Insert the faucet shank, hose end and outlet through the holes of the base plate and sink accordingly .
2 . From underneath, slide the rubber gasket and faucet shank nut over the end of the faucet shank, then tighten faucet shank by hand
until it is snug .
3 . Connect the hose end to the outlet . And then install the weight to the hose in a position where you could pull out the faucet and let it
retract back inside correctly .
4 . Connect the water supply lines (not supplied) to the faucet .
Rubber gasket
Faucet shank nut
QL058
Faucet shank
Base plate
Weight
Faucet head
Outlet
Sink
6
Hose end