Install Batteries; Battery Replacement - SP scienceware H-B DURAC B60911-0100 Manual Del Usuario

ENGLISH
DURAC
This Bluetooth Thermometer/Thermometer-Hygrometer works with operating systems iOS7+ or Android 4.3+ mobile devices or phones that have
Bluetooth 4.0 installed. Before use, make sure that the Bluetooth, alarm and notification functions are turned on. This unit is built with Bluetooth
Smart technology, so pairing is not necessary.
OPERATION
Download and install the Thermsmart application from the App Store or Play Store before getting started.

INSTALL BATTERIES

Use a screwdriver to open the battery door
Install 2 AAA batteries following the correct polarity
Use a screwdriver to close the battery door
When batteries are put in properly, the device will turn on automatically, and the LED light will be flashing. This is to remind you that synchronizing
the time of the device with your phone is needed, however, before synchronizing the time, you will need to register the device.

BATTERY REPLACEMENT

If the unit isn't pairing with a device then replace the batteries with new batteries of the same type.
NOTE
1. Do not operate the thermometer in environmental temperature conditions lower than 0°C / 32°F or higher than 50°C /122°F otherwise incorrect
readings or damage to the thermometer may result.
2. If the thermometer is not in use for a long period of time, remove the batteries from the battery compartment to avoid battery leakage.
REGISTERING THE UNIT
Important! Until the device is registered
it will not be seen on the app.
(Please make sure the device Bluetooth is turned on.)
1. Open the App on the mobile or phone device
2. Select the Weather icon on the Opening Page.
3. Select the Register Button on the Device List Page.
4. Press the Add Button
5. Press the Register Button
If the registration is successful, the app will return to the Registered Page.
2
DURAC ® Bluetooth Thermometer with 30-Day Data Logging (B60911-0100)
® Bluetooth Thermometer Hygrometer with 30-Day Data Logging (B61506-5100)
on the Register Page
of the unit you want to view.