Simons Voss Technologies SmartCD.MP Manual Del Usario página 14

Smart cards: place a smart card or smart tag on the circle on the program-
ming device and start programming in LSM.
Cylinders: place the front of the packaging (the side where the label is
affixed) on the programming device and start programming in the software.
You do not need to unpack products for programming under normal circum-
stances. Should programming be interrupted several times, you can make it
easier by removing the cylinder from the packaging.
6.2 Programming WitH Smart Cd .mP and a netbooK
or touCH booK
The current version of LSM 3.2 or higher must be installed on the PC or
laptop. LSM.Mobile 3.2 or higher must also be installed and set up on the
netbook or Touch Book.
Warning: you must always use the right version of LSM.MOBILE for LSM.
You can now export a locking plan created on the PC or laptop to a USB
flash memory. Once the export is complete, remove the USB flash memory
from the PC or laptop and insert into the netbook or Touch Book. Then
launch LSM.MOBILE and launch the locking plan from the USB flash memo-
ry in LSM.MOBILE and log on. Consult the manual for more information on
LSM.MOBILE.
14