Tools And Materials; Before You Begin - Kohler K-1665 Guia De Instalacion

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Blade
Drill and 3-7/8"
Screwdriver
or 4" Hole Saw
Phillips Claw
Screwdriver Hammer

Before You Begin

WARNING: Risk of personal injury and property damage.
Recessed portions of the housing, other than at points of
support, should be placed at least 1/2" (1.3 cm) from
combustible material.
WARNING: Risk of personal injury and property damage.
Do not install insulation above the fixture, as the insulation
will trap heat and prevent free circulation of air.
CAUTION: Risk of personal injury and property damage.
Do not use a light bulb exceeding 50 watts.
WARNING: Risk of personal injury and property damage.
Use of this lighting fixture with dimmers, timing controls,
energy saving devices, special security switching, and other
devices could create a safety hazard. Obtain professional
advice prior to using this lighting fixture with other products
other than those specified by Kohler Co.
1015878–2–B
Plus:
• Wire Cutter
• 12" (30.5 cm) x 18" (45.7 cm)
x 3/8" piece of plywood
• 3/8" wood screws
• Wire Nuts
Construction
Adhesive • 12 V, MR16, 50 W Max
light bulb
• Strain Relief Bushing
2 Kohler Co.