Setting The Input Voltage; Installation - MGE UPS Systems Pulsar STS Serie Manual Del Usuario

Installation

Setting the input
voltage
Before making any connections, make sure
that the sources selected to supply the
Pulsar STS are compatible with its
characteristics.
Pulsar STS 10 and Pulsar STS 16: 208V -
220V - 230V - 240V.
Pulsar STS 1400: 120V.
The factory input voltage setting for Pulsar
STS 10 and Pulsar STS 16 is 230V. If
necessary, set the voltage to another value
(208V, 220V, 230V or 240V) using the
voltage selector (see figure 3).
14
In the event of an electrical fault, a circuit
breaker on each of the source inputs
protects the Pulsar STS module.
The voltage selector
14
used only when the Pulsar STS
module is de-energized, i.e. power
cables not connected to the
7
sources.
Once the module has been correctly set up,
connect the two power cables
sources.
20 MGE UPS SYSTEMS - 5102761700/AC
may be
Fig. 3
to the two
7
208V input
voltage
1 2 3 4 5 6 7 8
220V input
voltage
1 2 3 4 5 6 7 8
14
7
230V input
voltage
1 2 3 4 5 6 7 8
240V input
voltage
1 2 3 4 5 6 7 8