Return Of Ac Power; Load Level; Overload - MGE UPS Systems Pulsar EX15 Manual De Instrucciones

operation
(continued)

return of AC power

c regardless of the point in the above
sequence at which AC power is restored,
Pulsar EX will switch to normal operation:
indicate the battery
1a 1d
to
charge level (here,
between 10% and 20%)
-
+
1e
- off/power on
% +
1f on/load energized
1 long beep
c your loads are being supplied by
Pulsar EX.
34

load level

c Pulsar EX is now running. Press and hold
down the test button 2 :
indicate the load level
1a 1d
to
(here, between 90%
and 100%)
-
+
off/power on
1e
-
%
+
flashing/power off
1f on/load energized
silence
c your loads are being supplied by
Pulsar EX.
Pulsar EX : 51032306XT/BB

overload

c overloading occurs if the power
consumption of the supplied loads exceeds
the rated output of Pulsar EX.
1a
flashing/overload
-
+
off/power on
1e
-
%
+
flashing/power off
1f on/load energized
intermittent beeps
c case of a device not fitted with the
"automatic bypass" option 21 :
v Pulsar EX will shut down after a delay
ranging from 100 ms to 1 minute depending
on the overload level;
c case of a device fitted with the
"automatic bypass" option 21 :
v if the power is within the operating range,
after a delay ranging from 100 ms to 1 minute,
the load will be switched to the AC for
20s and then back to the UPS,
v if the overload persists, Pulsar EX will
shut down and your loads will no longer
be supplied,
v if the power is not within the operating
range, Pulsar EX will shut down after a
delay ranging from 100 ms to 1minute and
your loads will no longer be supplied.
MGE UPS SYSTEMS