Promax DT-101B Guía Rápida De Configuración página 15

QUICK CONFIGURATION GUIDE. DT-101B/102B
RF Output (DVB-T)
Type
Conector
Frequency Range
Power level (average)
Frequency Stability
MER
Noise Phase SSB
Transport Stream Processing
Basic Functions
PID Filtering
TS Measures
Advanced Functions
(Available only when it
is connected to a DT-3XX
receiver)
Configuration
Power Supply
Connector
Voltage and highest
Consumption
02/2012
1 DVB-T multiplex (DT-101B) or 2 DVB-T
independent combined multiplex (DT-102B).
BNC female, Impedance 50 Ω.
From 474 to 875 MHz, in 1Hz step (see Options
for output in VHF band).
Aprox. 85 dBµV without attenuation.
Variable attenuation from 0 to 30 dB (in 1 dB
step).
10 ppm.
>37 dB from 650 MHz to 860 MHz.
>39 dB from 474 MHz to 650 MHz.
87 dBc/Hz at 2 kHz.
Filtering Table up to 32 PID.
Bitrate of the Output Multiplex.
Percentage of used bitrate (relative to the
maximum capacity of the multiplex).
Selection of Services by Name or streams
filtering by PID.
Automatic Regeneration of PAT and SDT tables
NIT table adaptation:
NID (Network Identifier) editable.
Management of LCN (Logic Channel Number) for
each module and service.
Through the DT-800 Control Module in local
(keypad) or remote mode (PC). (See DT-800
specifications)
Via the DT-800 Control and Power module
JST B08P-XL-HDS
with the DT-800 module)
+12 V, <0,55 A;
+5 V, <1,4 A.
(Connecting Cable supplied
Page 3