HAEGER Multi Cook FP-60B.001A Instrucciones De Uso página 6

English
 Unplug the appliance immediately after use.
 Always unplug the appliance before you reach into the blender jar with
your fingers or an object (e.g. spatula).
 Wait until moving parts stop running before you remove the lid of the bowl
or jar.
 Don't exceed the maximum content indicated on the bowl.
 Thoroughly clean the parts that come into contact with food before you
use the appliance for the first time.
 Before you remove or clean the disc, unplug the appliance.
 Never use any accessories or parts from other manufactures or which is not
specifically recommended. If you use such accessories or parts, your
guarantee becomes invalid.
 This appliance is intended for household use only.
 Let hot ingredients cool down (<70ºC) before processing them.
 If a process is not finished in the rated time, please turn off the power to
cool the appliance for 2 minutes before next processing. And in case of
processing of more than 5 lots, it needs to cool the appliance for 10
minutes before the next processing. This will help extend the lifetime of the
appliance.
 The maximum continuous operation time is 1 min and the minimum rest
time is 2 min.
Chopping blade
Before you start, make sure that you assemble according to fig.1.
You can use the blade unit to chop, mix, blend, or puree ingredients. You can
also use it to mix cake batters.
Caution
 Do not use the blade unit to chop hard ingredients, like coffee beans,
turmeric, nutmeg, and ice cubes, as this may cause the blade to get blunt.
 Do not let the appliance run too long when you chop (hard) cheese or
chocolate. Otherwise these ingredients become too hot, start to melt and
turn lumpy.
 Pre-cut large pieces of food into pieces of approx. 3 cm
Use
1. Put the driving shaft on the motor unit; turn the bowl clockwise to fix it on
the motor unit.
2. Put the blade unit on the tool holder.
3. Put the ingredients in the bowl.
4
.
3
Instructions for use