Maintenance And Inspection; Safety Measures; Maintenance And Inspection Table; Warranty - CEMO K10C Manual De Instrucciones

GB

6. Maintenance and inspection

6.1 Safety measures

i
Important!
The operator must provide any
protective clothing that may be required.
6.2 Maintenance and inspection
Interval Assembly
As required Outside of filling station
Monthly Container
Monthly Piping system
Annually Filter
Regular maintenance of the hand pump is not necessary.
The filter is located between the hose sleeve and ball valve.
To clean the filter, close the ball valve and
unscrew and remove the hose sleeve.
7. Decommissioning the
filling station
• First, drain the tank completely (by means of
the pump via the delivery hose and delivery
nozzle while in a horizontal position).
Next:
• Disassemble the diesel trolley into its consti-
tuent parts, sort by material and dispose of in
accordance with local regulations.
Risk
of environmental contamination
through residues in the tank. Collect
these residues separately and dispo-
se of them in compliance with local
environmental regulations.
16
Who can carry out maintenance and inspection
work?
Normal maintenance work may be carried out
by operational personnel.
Action
Remove any dirt
Visual check for damage
Check hoses for cracks and porosity,
check fittings for leaks (replace defective parts)
Clean
Hose sleeve
Ball valve

8. Warranty

Under our general terms and conditions of trade
we warrant that the filling station will be produ-
ced free from defects in materials, functionality
or workmanship. These can be inspected at
http://www.cemo.de/agb.html
The warranty applies only under the condition
that the above operating and maintenance
instructions and all applicable regulations are
closely followed.
Modification of the filling station by the custo-
mer without consultation with the manufacturer
CEMO GmbH invalidates any claims under the
statutory warranty.
CEMO GmbH also accepts no responsibility for
damage caused by improper use.
Seal
Filter