Technical Information - V2 ECO-LOGIC Manual Del Usuario

Ocultar thumbs

Contenido

página de 49

/ 49
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

PRELIMINARY CHECKS

AND LIMITS OF USE

Perform the checks described in this chapter to ensure that the

product is suited to the characteristics of the automation device to

be supplied.

Nearby the automation device to be supplied, identify the most

suitable point for installing the solar panel and the most suitable

point for installing the accumulator unit, taking the following

points into consideration.

Solar panel

• The maximum length of the solar panel cable should not

exceed 10 m.

Use a 2x1 mm

cable (maximum outer diameter 6.5 mm)

• The surface selected for fixing both devices should be of solid

material and should guarantee stable fixing

• The location selected for installation of the panel should

guarantee 100% direct sunlight throughout the year

• The location selected for installation of the panel should

be away from plants, walls or anything else that might cast

shadows, even partial, over the sensitive surface.

Partial shadows significantly reduce the energy capacity of the

panel.

Accumulator

• The maximum length of the cable carrying power to the

control unit should not exceed 3 m.

Use a 2x1,5 mm

cable (maximum outer diameter 10 mm)

• The device should be installed in a location protected from

direct sunlight and possibly also at low temperature.

Such extreme conditions compromise battery yield and

lifespan.

• Never allow the battery to discharge to the point where the

red LED remains on, since this risks irreparable damage to the

battery.