Spare Parts/Accessories - 3M Peltor Alert Manual Del Usuario

GB
9. TECHNICAL DATA
9:1 Attenuation values, SNR (F)
(F:1) Headband
(F:2) Helmet attachment
Explanation of the attenuation data table (F:1, F:2)
1. Frequency (Hz)
2. Mean attenuation (dB)
3. Standard deviation (dB)
4. Assumed protection value (dB)
5. Weight of the product
9.2 Explanation of the criterion level table (F:3)
A criterion level is the amount of noise (measured as A-weighted sound pressure) outside the hearing protector that gives
85 dB(A) inside. The criteria level varies depending on the frequency content of the noise.
H = attenuation of high-frequency noise.
M = attenuation of mid-range noise.
L = attenuation of low-frequency noise.
9.3 Explanation of the testing and approval table
(H:1) This product is in conformity with the provisions set out in the following directives. Thereby it fulfils the requirements
for CE marking.
(H:2) This product has been tested and approved in accordance with following standards.
(H:3) The product has been examined by.
9.4 Explanation of safety helmet table (I)
These ear-muffs should be fitted to, and used only with, the industrial safety helmets listed in table (I).
1. Helmet manufacturer
2. Helmet model
3. Helmet attachment (J)
4. Sizes: S = Small, N = Medium, L = Large

10. SPARE PARTS/ACCESSORIES

3M Peltor HY81 Hygiene kit
TM TM
Replaceable hygiene kit consisting of two attenuation cushions and two snap-in ear cushions. Replace at least twice a year
to ensure constant attenuation, hygiene and comfort.
3M Peltor HY100A Single-use protectors
TM TM
A single-use protector that is easy to fit to the ear cushions. Pack of 100 pairs.
3M Peltor M60/2 Wind protection for ambient microphones
TM TM
Effective against wind noise; enhances life span and protects the microphones. One pair per pack.
3M Peltor 1073 SV Battery cover
TM TM
3M Peltor FL6CE/1 Connection cables for external audio input
TM TM
3.5 mm stereo jack
Important message
3M does not accept liability of any kind, be it direct or consequential (including, but not limited to, loss of profits, business and/
or goodwill) arising from reliance upon any information herein provided by 3M. The user is responsible for determining the
suitability of the products for their intended use. Nothing in this statement will be deemed to exclude or restrict 3M's liability
for death or personal injury arising from its negligence.
Peltor™ is a brand owned by 3M, St. Paul, MN 55144-1000, USA.
4