Sea gull lighting Nance 2 Manual Del Usuario página 2

Install the Fixture
1A
JUNCTION BOX
MOUNTING PLATE
THREADED NIPPLE
COLLAR NUT
DIFFUSER
2
DIFFUSER RING
1 Feed the fixture wires through the threaded pipe and screw it onto the shade assembly.
2
Place the diffuser into the diffuser ring, then install the diffuser assembly into the shade by carefully sliding it into place.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.
3
FOR SEMI FLUSH MOUNT ONLY -
4
washers by unscrewing the cap nuts.
FOR SEMI FLUSH MOUNT ONLY -
5
If necessary, screw the shorter end of the threaded nipple tightly onto the mounting plate.
6
Temporarily unscrew and remove the collar nut from the screw collar, then screw the screw collar tightly onto the threaded nipple.
7
8 Secure the mounting plate to the junction box.
Screw the fixture loop onto the fixture. Determine the wanted height of the fixture and remove a portion of the chain by opening
9
a link and removing it from the bottom.
Install the canopy and collar nut onto the chain (in that order), then install the open link onto the fixture loop and secure it in
10
place by closing the link.
Weave the cord through the chain and canopy, then trim the cord leaving enough to make electrical connections.
11
Connect the fixture to a suitable ground in accordance to local electrical codes.
12
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
13
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
14
FOR SEMI FLUSH MOUNT ONLY -
15
Neatly place all the wires into the junction box, place the canopy onto the ceiling, and secure it in place by screwing the collar nut
16
tightly onto the screw collar.
13
7
9
1
LAMP
: Unscrew and remove the fixture loop from the fixture, then remove the cap nut screws and
:
Install the mounting plate with the two mounting studs to the junction box.
: Align, then place the fixture onto the mounting plate studs and secure it with the two cap nuts.
14
6
SCREW COLLAR
CANOPY
CHAIN
CAP NUT
FIXTURE LOOP
CAP NUT
THREADED PIPE
SOCKET
3
2
Semi-Flush Mounting
MOUNTING
PLATE STUD
MOUNTING
PLATE
5
MOUNTING
SCREW
15
SHADE ASSEMBLY
SKIP TO STEP 12