C
17. Now, go back and securely tighten all the Cam Locks and Wood Screws. Make sure all the parts are
tight and there are no gaps between the parts. This will help keep the unit square.
18. Unfold the Back Panel (Q) and lay it to the back of the assembled unit. Make sure the margins along all
edges of Back Panel are equal. Screw the 15 mm Washer Head Screws (7) into the pre-drilled small
holes on the Back Panel (Q).
NOTE: We recommend attaching back panel with the screws at the corners first.
Assembly Instructions
Q
E
M3.5 x 15 mm Washer Head
(32 used in this step)
17
Screw
⑦
7