Operation; Using The Timer Function - Whalen FP26-1A Guía De Uso Y Cuidado

Operation

1
Identifying the control panel
□
The control panel is located on the top left corner of the
fireplace/heater unit.
□
The control panel contains the display unit (1), function
indicator (2), timer function (3), heater control (4), flames
control (5), and main power (6).
□
The display unit (1) displays information about the flame level,
timer, and current temperature.
1
2
3
4
5
6
3

Using the timer function

□
The timer button (3) allows you to set the amount of time you want the fireplace/heater to run. The timer button (3) operates both the
flames and the heater function. If the heater is operating when the timer is set, then the heater is on the timer. If the flames are
operating, then the timer will control the flames. If both the heater and flames are operating with the timer set, then the timer controls
both the flames and the heater. Pressing the button in sequence will set the timer for a set interval. This interval period is shown in the
display (1), in blue. The set intervals are displayed in this table. The timer interval is set from the time the interval is selected. There is
no clock function for turning the heater or flames on or off at a specific time.
Button Press
1st press
2nd press
3rd press
4th press
5th press
6th press
7th press
8th press
1
Timer Interval
30 Minutes
1 Hour
2 Hours
3 Hours
4 Hours
5 Hours
6 Hours
OFF
3
2
Understanding the function indicator
□
The function indicator (2) has three square LEDs – red, green,
and blue. The red LED indicates that the Fahrenheit
temperature heating function is running, the green LED
indicates that the Celsius temperature heating function is
running, and the blue LED indicates that the timer function is
engaged.
□
To the right of the three LEDs, is the infrared receiver module
which communicates with the remote control to control the
heater.
2
Display
30
1h
2h
3h
4h
5h
6h
None
5