Tabla de contenido
Idiomas disponibles
Idiomas disponibles
19
Cam Lock
(6 used in this step)
4. Insert four 30 mm Wood Dowels (3) into the inner holes of the Fireplace Front Molding (L) and Bottom
Back Stretcher (K). Tap in with a rubber mallet, if necessary. Make sure that you use a small amount of
glue with both ends of all dowels.
NOTE: It is very important to use a small amount of glue on both ends of dowels.
5. Align the drilled holes on the Bottom Panel (B) with the inserted Wood Dowels (3) on the Fireplace Front
Molding (L) and Bottom Back Stretcher (K), and then press them together. Attach the Stretchers (K and L)
in place by engaging six Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement).
6. Screw two Floor Levelers (19) into the threaded inserts on the Fireplace Front Molding (L) and set to the
correct height.
Fireplace Assembling
1
M8 x 30 mm Wood Dowel
(4 used in this step)
①
K
3
3
B
3
③
8
L
3
Floor Leveler
(2 used in this step)
⑲
Tabla de contenido
