Personal Protective Equipment; Important Safety Instructions For Charger & Battery - POWER SMITH PCS140H Manual Del Operador

SPECIFIC SAFETY RULES FOR CHAIN SAW

PERSONAL PROTECTIVE EQUIPMENT

Warning:
You must use approved personal protective equipment whenever you use the machine.
Personal protective equipment cannot eliminate the risk of injury, but it will reduce the degree
of injury if an accident does happen. ask your dealer for help in choosing the right equipment.
always Wear: (Fig 5)
•
Approved protective helmet
•
hearing protection
•
Protective goggles or a visor
•
Gloves with saw protection
•
Pants with saw protection
•
Boots with saw protection, steel toe-cap and
non-slip sole
•
Always have a first aid kit nearby.
•
Fire Extinguisher and Shovel
Generally, clothes should be close-fitting without
restricting your freedom of movement.
IMPORTANT! Sparks can come from the bar and
chain or other sources. Always have fire extinguishing
tools available if you should need them. help prevent
forest fires.
IMPORTANT SAFETY INSTRUCTIONS
• Save these Instructions. This manual contains important safety and operating instructions for your battery
charger.
• Before using the battery charger, read all instructions and cautionary markings on (1) Battery Charger, (2)
Battery, and (3) Product using battery.
• Use only the charger which accompanied your product or direct replacements as listed in this manual. Do not
substitute any other charger.
• Do not recharge battery in damp or wet environments. Do not expose battery pack to water or rain.
• Do not operate charger with damaged cord or plug. Replace immediately.
• Do not operate charger if it has received a sharp blow, been dropped or otherwise damaged in any
way. Take it to a qualified serviceman.
• Do not disassemble charger or battery pack. Take it to a qualified serviceman when service or repair is
required. Incorrect reassembly may result in a risk of electric shock or fire.
• Do not charge battery pack when temperature is below 50° F (10° C) or above 104° F (40° C). Store tool
and battery pack in a location where temperature will not exceed 122° F (50° C). This is important to prevent serious
damage to the battery cells.
• Place charger on flat non-flammable surface and away from flammable materials when re-charging the
battery pack.
• To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning.
• If operating time has become excessively shorter, stop operating immediately. It may result in a risk of
overheating, possible burns and even an explosion.
• Battery leakage may occur under extreme usage or temperature conditions. Avoid contact with skin and eyes.
If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets into your eyes, wash
Most chain saw accidents happen when the chain touches the operator.
FOR CHARGER & BATTERY
English
8
fig 5